[VENDIDO] VENDO BAJO KRAMER 450-B
Publicado: 22 Jun 2011, 19:08
Después de que el año pasado lo retirara de la venta , y sin apenas darle uso, vuelvo a poner a la venta éste bajo de finales de los 70 .
Copio-pego algunas características :
"has a bolt-on aluminum neck and two humbucking pickups. The fretboard is phenolic. The back of the bolt-on aluminum neck is enhanced with two walnut inserts."
"The Kramer aluminum neck era ran from 1976 to 1985 and was the legacy of the company before switching over to the more popular wood neck models uring the 80s. The first production batch of Kramers were introduced in November 1976. All of these early Kramers featured a "forked" aluminum headstock and aluminum "skeletal" neck . These necks, designed for sustain, contained slots that ran the length of the neck for holding the wood fills in place. (See diagram) The idea of the wood inlays were to reduce the coldness feel of aluminum. Usually but not always, the wood neck fills were the same type and color as the body. The Ebonol fretboard contained large Phil Petillo designed "center-touch" frets, a zero nut and aluminum dot inlays. The higher up models had the mother of pearl "crown" shaped inlays. Tuners were Schallers. They were manufactured at the Kaiser Aluminum plant on East Avenue in Erie, Pennsylvania. The necks were attached to the body by two bolts and the bolts were covered by an oval shaped aluminum plate. Control cavity covers were also aluminum. ."
El puente se lo cambió su anterior dueño .
Fotos ...
Los "marcos " de las pastillas se rompieron hace muchos años y los pegaron con adhesivo
Va con estuche, que aunque tiene sus "rasguños " funciona perfectamente .
El precio son 550 € con envío incluido a peninsula.
NO ACEPTO CAMBIOS .
Copio-pego algunas características :
"has a bolt-on aluminum neck and two humbucking pickups. The fretboard is phenolic. The back of the bolt-on aluminum neck is enhanced with two walnut inserts."
"The Kramer aluminum neck era ran from 1976 to 1985 and was the legacy of the company before switching over to the more popular wood neck models uring the 80s. The first production batch of Kramers were introduced in November 1976. All of these early Kramers featured a "forked" aluminum headstock and aluminum "skeletal" neck . These necks, designed for sustain, contained slots that ran the length of the neck for holding the wood fills in place. (See diagram) The idea of the wood inlays were to reduce the coldness feel of aluminum. Usually but not always, the wood neck fills were the same type and color as the body. The Ebonol fretboard contained large Phil Petillo designed "center-touch" frets, a zero nut and aluminum dot inlays. The higher up models had the mother of pearl "crown" shaped inlays. Tuners were Schallers. They were manufactured at the Kaiser Aluminum plant on East Avenue in Erie, Pennsylvania. The necks were attached to the body by two bolts and the bolts were covered by an oval shaped aluminum plate. Control cavity covers were also aluminum. ."
El puente se lo cambió su anterior dueño .
Fotos ...
Los "marcos " de las pastillas se rompieron hace muchos años y los pegaron con adhesivo
Va con estuche, que aunque tiene sus "rasguños " funciona perfectamente .
El precio son 550 € con envío incluido a peninsula.
NO ACEPTO CAMBIOS .
