Os dejo las especificaciones.
EFFECT LOOP
Loop Signal Level -10 dBv
Gain Unity (1:1)
Output Impedance Send <100 ohms
Input Impedance Return 47 kohms // 100 pF
TUBE SECTION:
Gain Range: min/max -0 / +34 dB
Tube Type: ECC83 (European type)
Low End Compensation: < 350 Hz
LINE OUT:
Output Impedance: max 5 kohms
Nominal Signal Level: 0 dBv
TUNER OUT:
Output Impedance: max 100 ohms
Signal Level: Instrument signal strength
POWERAMP:
Load Impedance 2 - 8 ohms
Continous Output Power 360 W RMS @ 4 ohms
500 W RMS @ 2 ohms
Dynamic Output Power 440 W RMS @ 4 ohms
620 W RMS @ 2 ohms
Cooling System Active Temperature controlled fan
AUXILIARY INFO:
Power Requirements 600 W max
Mains Protection T5A 20 mm Fuse ( 230V )
T10A 20 mm Fuse ( 120V )
Dimensions 19" ( 420/480 mm ) Width
10" ( 255/296 mm ) Depth
3 HE ( 130/133 mm ) Height
Weight 24,2 lbs. ( 11,0 kg )
Shipping 25,3 lbs. ( 11,5 kg )
References: 0 dBv = 0.775 V RMS
INPUT:
Input Impedance 1 Mohms // 100 pF
Input Level min/max -30 / +4 dBv
Phantom Power Option: 10 V, 20 mA max.
GAIN:
Gain Range min/center/max -/ +12 /+30 dB
clip +20 dBv
Gain Peak Led +10 dBv
Frequency Response +0/-3 dB 35 - 20k Hz
COMPRESSOR/LIMITER:
Compressor Gain 0 dB
Attenuation max 24 dB
Compression Ratio max 3:1
Attack (80%) typ <10 ms
Release (80%) typ 100 ms
Distortion 1 kHz/0 dBv 0.04 %
10 kHz/+15 dBv 0.22 %
PRESHAPE BOOST FILTERS:
LO Filter: Type Shelving Low Pass
Gain +9 dB @ 50 Hz
HI Filter: Type Shelving High Pass
Gain +9 dB @ 8 kHz
FILTER SECTION:
Bass Filter: Type 12 dB/oct. Shelving
Gain Range +/- 15 dB @ 100 Hz
Middle Filter: Type Bandpass Filter
Q 0.8
Gain Range +/- 15 dB @ 400 Hz
Frequency 50 - 2k Hz
Treble Filter: Type Bell
Q 0.5
Gain Range +/- 15 dB @ 5 kHz
Bright Filter: Type High Pass
Gain Range -0 / +20 dB @ 10 kHz